Store Doubleword Using Non-Temporal Hint


Hex Mnemonic Encoding Long Mode Legacy Mode Description
REX.W + 0F C3 /r MOVNTI m64, r64 A Valid N.E. Move quadword from r64 to m64 using non-temporal hint.
0F C3 /r MOVNTI m32, r32 A Valid Valid Move doubleword from r32 to m32 using non-temporal hint.

Instruction Operand Encoding

Op/En Operand 0 Operand 1 Operand 2 Operand 3
A NA NA ModRM:reg (r) ModRM:r/m (w)


Moves the doubleword integer in the source operand (second operand) to the destination operand (first operand) using a non-temporal hint to minimize cache pollution during the write to memory. The source operand is a general-purpose register. The destination operand is a 32-bit memory location.

The non-temporal hint is implemented by using a write combining (WC) memory type protocol when writing the data to memory. Using this protocol, the processor does not write the data into the cache hierarchy, nor does it fetch the corresponding cache line from memory into the cache hierarchy. The memory type of the region being written to can override the non-temporal hint, if the memory address specified for the non-temporal store is in an uncacheable (UC) or write protected (WP) memory region. For more information on non-temporal stores, see "Caching of Temporal vs. Non-Temporal Data" in Chapter 10 in theIntel®64 and IA-32 Architectures Software Developer's Manual, Volume 1.

Because the WC protocol uses a weakly-ordered memory consistency model, a fencing operation implemented with the SFENCE or MFENCE instruction should be used in conjunction with MOVNTI instructions if multiple processors might use different memory types to read/write the destination memory locations.

In 64-bit mode, the instruction's default operation size is 32 bits. Use of the REX.R prefix permits access to additional registers (R8-R15). Use of the REX.W prefix promotes operation to 64 bits. See the summary chart at the beginning of this section for encoding data and limits.

Pseudo Code



SIMD Floating-Point Exceptions


64-Bit Mode Exceptions

Exception Description
#AC(0) If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3.
#UD If CPUID.01H:EDX.SSE2[bit 26] = 0. If the LOCK prefix is used.
#PF(fault-code) For a page fault.
#GP(0) If the memory address is in a non-canonical form.
#SS(0) If a memory address referencing the SS segment is in a non-canonical form.

Compatibility Mode Exceptions

Same exceptions as in protected mode.

Virtual-8086 Mode Exceptions

Exception Description
#PF(fault-code) For a page fault.
Same exceptions as in real address mode.

Real-Address Mode Exceptions

Exception Description
#UD If CPUID.01H:EDX.SSE2[bit 26] = 0. If the LOCK prefix is used.
#GP If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside the effective address space from 0 to FFFFH.

Protected Mode Exceptions

Exception Description
#UD If CPUID.01H:EDX.SSE2[bit 26] = 0. If the LOCK prefix is used.
#PF(fault-code) For a page fault.
#SS(0) For an illegal address in the SS segment.
#GP(0) For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments.